$7,880.00Original price was: $7,880.00.$3,440.00Current price is: $3,440.00.
As part of the Versiv cabling certification product family, the DSX Cable Analyzer provides accurate, error-free certification. In the installation business there are multiple teams, varying media types and multiple testing requirements. The difference between profitability is just a few percentage points. The DSX certifies copper cabling, complies with all standards including Level V accuracy, making jobs easier to manage, and getting to system acceptance faster. It’s not just for the expert technicians and Project Managers. Individuals of various skill levels can improve the set-up, operation, test reporting, and simultaneously manage diverse projects.
Versiv enables users to accomplish more than ever with a cable tester, by accelerating every step of the testing process
ProjX management system eases tasks from initial set-up of a job to system acceptance. It eliminates redundant steps, and ensures that all tests are completed correctly the first time, and every time
Taptive user interface puts advanced data analysis and easy set-up and operation at the fingertips of of technicians of all skill levels
LinkWare management software provides unmatched analysis of test results and professional test reports
The DSX reduces the time required to fix cabling faults with Dedicated Diagnostics, a simple test that locates the problem
Performance:
Ten second Cat 6A test time contributes to the fastest way to gain certification
Graphically displays the source of failures including crosstalk and distance to shield faults for faster troubleshooting
Manage up to 12,000 test results with full graphics
Capacitive touchscreen allows quick tester setup with easily selectable cable types, standards and testing parameters
1 billion links reported on LinkWare management software
Standards Fluke DSX-5000:
Compliant with proposed ISO (IEC WG9 Standard IEC61935-1) Level V accuracy requirements to 1000 MHz
Supports the complete suite of Resistance Unbalance standards needed for Power over Ethernet (PoE) – IEC61935-1 & 11801-1-4, IEEE 802.3af, IEEE 802.3at, ANSI/TIA/EIA-568-C.2
Next generation balance drafts – IEEE 802.3, TIA TR42.7
DSX-5000 CableAnalyzer Specifications
Cable Types
Shielded and unshielded
pair LAN cabling
TIA Category 3, 4, 5, 5e, 6, 6A: 100 Ω ISO/IEC Class C, D, E, EA, F, and FA: 100 Ω and 120 Ω
Standard Link Interface Adapters
Permanent link adapters
Plug type: shielded RJ45
Optional Plug type: Tera
Channel Adapters
Jack type: shielded RJ45
Optional Jack type: Tera
Test Standards
TIA
Category 3, 4, 5, 5e, 6, 6A per TIA 568-C.2
ISO/IEC
Class C and D, E, Ea, F, FA certification per ISO/IEC 11801:2002 and amendments
Maximum frequency
1200 MHz
General Specifications
Speed of Autotest
Full 2-way Autotest of Category 5e or 6/Class D or E: 9 seconds Full 2-way Autotest of Category 6A/Class EA: 10 seconds
Support test parameters (The selected test standard determines the test parameters and the frequency range of the tests)
Wire Map, Length, Propagation Delay, Delay Skew, DC Loop Resistance, Insertion Loss (Attenuation), Return Loss (RL), NEXT, Attenuation-to-crosstalk Ratio (ACR-N), ACR-F (ELFEXT), Power Sum ACR-F (ELFEXT), Power Sum NEXT, Power Sum ACR-N, Power Sum Alien Near End Xtalk (PS ANEXT), Power Sum Alien Attenuation Xtalk Ratio Far End (PS AACR-F)
Input protection
Protected against continuous telco voltages and 100 mA over-current. Occasional ISDN over-voltages will not cause damage
Display
5.7 in LCD display with a projected capacitance touchscreen
Case
High impact plastic with show absorbing overmold
Dimensions
Main Versiv unit with DSX-5000 module and battery installed: 2.625 in x 5.25 in x 11.0 in (6.67 cm x 13.33 cm x 27.94 cm)
Weight
Main Versiv unit with DSX-5000 module and battery installed: 3 lbs, 5oz (1.28 kg)
Main unit and remote
Lithium ion battery pack, 7.2 V
Typical battery life
8 hours
Charge time*
Tester off: 4 hours to charge from 10 % capacity to 90 % capacity
Languages supported
English, French, German, Spanish, Portuguese, Italian, Japanese and Simplified Chinese
Calibration
Service center calibration period is 1 year
Environment Specifications
Operating Temperature
32° F to 113° F (0° C to 45° C)
Storage Temperature
-4° F to +122° F (-20° C to +50° C)
Operating relative humidity (% RH without condensation)
Reviews
There are no reviews yet.